:

   
Dense Wavelength Division Multiplexer Mux/Demux (4 /8 / 16 channel)
 
The multi-channel Dense Wavelength Division Multiplexer (DWDM) Modules are based on thin film DWDM devices by cascading individual channels into sequence. Channel numbers can be as high as 40(16) for 100(200)GHZ systems in C band or in L band, They are featured with wide pass band, low insertion loss, high channel isolation and high environmental stability. They can be used in Dense WDM systems to perform multiplexing or demultiplexing function.

Specifications Dense Wavelength Division Multiplexer Mux/Demux 

Parameters

4-channel

8-channel

16-channel

Filter Type
100GHZ or 200GHZ
Pass Band
±0.11 for 100GHZ, ±0.25 for 200GHZ
insertion Loss
2.2dB
3.2dB 4.5dB
Pass band Flatness
≤0.5dB
Channel Uniformity
1.5dB
Channel Isolation mux
N/A
Channel Isolation demux
25dB
PMD
0.2ps
PDL
0.1dB
Directivity
55dB
Return Loss
45dB
Center wavelength stability
0.002nm/°C
Therml Stability
0.006dB/°C
Maximum Optical Power
500mW
Tensile Load
5N
Filber Type
Corning SM28e
Operating Temperature
-5°C to +70°C
Storage Temperature
-40°C to +85°C
Package Dimension
120mmx80mmx9.5mm  (for 4 channels)
120mmx100mmx9.5mm  (for 8 channels)
1150mmx120mmx14mm  (for 16 channels)
Note1: Values specified are without connector loss.

Package Dimensions 

 
Ordering Information- multi-channel Dense Wavelength Division Multiplexer Mux/Demux 
DWDMM-SM-P-Q-R-SS-X-Y-Z
P : Module type M - MUX, D - DEMUX
Q : No of channels 4 - 4 channels, 8 - 8 channels, 16 -16 channels
R : Channel spacing 1 - 100 GHz, 2 - 200 GHz
SS : First ITU Grid  
X : Pigtail type B - 250um bare fiber,  L - 900um loose tube,  S -  Specify
Y : Pigtail length 1-  0.5m,  S -  Specify
Z : Connector   1 - FC/UPC, 2 - FC/APC, 0 - None, S - Specify
 

More WDM/couplers

 

Home products Services Contact more WDM Search

back to top

© 2001-2010 AFW Technologies Pty. Ltd. 
 Voice: + 613 9702  4402 Fax: +613 9702 4877 
   Webmaster: webmaster@afw Last modified: 12th July 2010