|
||||||||||||||
|
||||||||||||||
| Polarization Beam Combiner/Splitter | |||
| The
Polarization Beam Combiner can combine two orthogonal polarization
components into one output fiber. The typical configuration uses the two
PM fibers for the input and the SM fiber for the output. Polarization
beam splitter can split the input signal into two outputs. The device
provides high extinction ratio with low loss. |
 |
 |
|
Specifications - Polarization Beam Combiner/Splitter |
|
| Parameters |
Values
|
| Operating Wavelength |
1310nm or 1480nm or
1550nm +/-40nm
|
| Insertion Loss |
£
|
| Extinction Ratio |
³
|
| Return Loss |
³
|
| Max. Optical Power (CW) |
500mW
|
| Fiber |
PM panda fiber all
ports or SMF fiber on port3
|
| Max. Tensile Load |
5N
|
| Operation Temperature |
-5°C to +70°C
|
| Storage Temperature |
-40°C to +85°C
|
| Note1:The PM fiber and the connector key are aligned to the slow axis. | |
| Note2: Values specified are without connector loss. With connector IL 0.25dB higher, RL 5dB lower and ER 2dB lower. | |
|
Package Dimensions |
||
|
|
|
|
| Ordering Information - The Polarization Beam Combiner/Splitter | |
| POBS-SS-W-X-Y-Z or POBC-SS-W-X-Y-Z | |
| SS: Wavelength | 13 - 1310nm, 14 - 1480nm, 15 - 1550nm |
| W: Pigtail type | B - 250 um panda fiber, L - 900um loose tube panda fiber, C - 3mm cable, S - Specify |
| X: Fiber type for port 3 | 1 - SMF-28, 3- Slow axis align to output 1, S - Specify |
| Y: Pigtail length | 5- 0.5m, 7 -0.75 m, S - Specify |
| Z: Connector | 1 - FC/UPC, 2 - FC/APC, 0 - None |
| Home | products | Services | Contact | more PM components | Search |
 |
| © |
| Voice: + 613 9702 4402 Fax: +613 9702 4877 |
|
Webmaster:
webmaster@afw
Last modified: 12th July 2010 |
