:

   
1064 nm singlemode patchcords, Hi1060 fiber or Hi 980
980nm or 1064nm

 

Singlemode patchcords or jumper leads can be terminated with FC/UPC, FC/APC, SC/UPC and SC/APC.  AFW patch cords have excellent environmental stability, high return loss and low insertion loss. Various cable types available including 250um bare fiber(unjacketed), 900micon buffered fiber and 3mm cable. Yellow color PVC material with Kevlar strength members inside will be used for 3mm cables. 900mciron cables can be supplied with various colors such as yellow, green, red, black or blue. Since Corning Hi1060 or Hi980 fibre used to build patch cords operating wavelength ranging from 980nm ~ 1064nm. When ordering patch cords please specify wavelength and required fibre type.

AFW can supply mating adaptors (or through adaptors, bulkhead) to interconnect two patch cords. Usually we stock square flange, panel mount or D-type adaptors for wide range of applications. FC/UPC female to FC/APC male adaptors also available to minimise the requirement of a male to female patchcord. These adaptors give flexibility to have APC output from a UPC ferrule endface. AFW also can supply FC type bare fiber adaptors for quick connection.   

 

Click for Polarization maintaining (PM panda fiber) patchcord or jumper leads.  
Looking for adaptors or mating sleeves?  
If you have questions send us an email or check our FAQ.  

Specifications
Parameters
Values
Connector Type
FC/UPC, SC/UPC
             FC/APC, SC/APC
Wavelength
980nm or 1064 nm  
Max. Insertion Loss
0.7dB

               0.5dB

Min Return Loss
50dB
               60dB
Max. Optical Power
300mW
Fiber type

 Corning Hi980 fiber or Hi1060 fiber

Fiber Length Tolerance
+/-5cm
Fiber length

1m or specify

Operation Temperature
-5°C to +70°C
Storage Temperature
-40°C to +85°C

Ordering Information
FOP-SS-W-X-Y-Z
SS: Wavelength 64 - 1064 nm, 98 - 980 nm, S - Specify
W : Buffer Type B - 250um bare fiber(with 3cm long loose tube connector end), L - 0.9mm buffer, C - 3mm Cable
X : Pigtail length 1 - 1.0 m, 2 - Specify
Y: Pigtail  type H64- HI 1060, H98 - Hi980, S- Specify 
Z: Connector type 1 - FC/UPC, 2 - FC/APC, S - Specify
 
FAQ for singlemode patchcords
 
Q1. I am looking for a 50m Hi1064nm fiber patch cord, are you able to build this?

Yes, we can build this type of patchcord, with an outside diameter of 4mm or 5mm and a 1m
long jacket cable at each connector end to allow for flexible handling. We can also bundle 2 or
3 fibers into the same cable. Please refer to the below diagram for the structure of the cable.
 

 
 
  Adaptors  
     

 

ADA-FC-FC-S

FC type through adaptors, square flange, zirconia sleeves, for singlemode patchcords

ADA-FC-FC-D FC type through adaptors, round D type, panel mount, zirconia sleeves, for singlemode patchcords
ADA-SC-SC-S SC-SC through adaptor, simplex
ADA-SCA-SCA-S SC/APC-SC/APC through adaptor simplex
ADA-FC-BARE FC type bare fiber adaptor, 126um ferrule bore

ADA-PM-22-R-S

PM FC through adaptor, 2.03mm key way (R type), square flange, zirconia sleeves for PM patchcords

ADA-PM-22-R-D

PM FC through adaptor, 2.03mm key way (R type), round D type panel mount, zirconia sleeves for PM patchcords

ADA-PM-22-N-S

PM FC through adaptor, 2.10~1.14mm key way (N type), square flange, zirconia sleeves for PM patchcords

 

 

Home products Services Contact more components Search

back to top
© 2001-2010 AFW Technologies Pty. Ltd. 
 Voice: + 613 9702  4402 Fax: +613 9702 4877 
   Webmaster: webmaster@afw Last modified: 12th July 2010